The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
Finely tuned ride feel—laterally and torsionally stiff with just the right amount of give to smooth out roots and rock gardens. - One piece carbon crown and steer tube section with molded legs - Full carbon dropouts and brake mount - Suspension-corrected axle-crown height based on 100mm suspension fork - Blade/Crown/Dropout: Carbon - Steerer: Tapered carbon - Steerer Length: 300mm - Steerer Diameter: 1-1/8" - Rake: 45mm - Brake Mount: Post - Axle-Crown: 470mm - Crown Diameter: 61mm - Matte UD carbon finish - Weight: 672g
Dimension Rigid Mountain Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets - Chromoly tubing - Cantilever mounts only (no disc mount) - Axle to Crown Length: 395mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Maximum Tire Clearance (Fork): 3.8 - Offset: 45mm - S.H.I.S. Stem Clamp Diameter: 25.4 - Steer Tube length: 260mm - Steerer Type: Straight - Weight: 1000g - Wheel Size: 26-inch
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
Surly's Pacer Fork is a great all around steel road bike fork. Able to accommodate tires up to 32c, or 28c with a fender, this fork will get you where you need to go with a smooth, supple ride. Single eyelets at the dropouts allow for some bolt on parts, and the classic black powdercoat is tres chic.
Surly's Steamroller Fork pairs great handling with urban utility. It has steep track geometry for lightening fast response, making it as at home on the velodrome as it is flying downtown with cars and pedestrians. It features a flat crown, drilled to accept a standard-reach caliper brake, and the use of wide 38mm tires. And its stealthy Black powdercoat means your opponents in the Pursuit race will never see you coming!
Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 - Steerer Type: Straight - Weight: 773g (1-inch); 780g (1 1/8-inch) - Wheel Size: 700c
- Forged dropouts with eyelets, straight-gauge oval tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - 85mm threaded section - Fits up to 30c tires - Axle to Crown Length: 382 mm - Brake Mount (Fork): Long Reach Caliper (55mm - 73mm) - Crown Race: 27 - Front Axle: 9mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill - Steerer Type: Straight - Weight: 839g, 876g, 907g - Wheel Size: 27"
The WeThePeople Patron Fork is all about choices. The 7mm full investment cast, heat-treated hollow dropouts are what make this fork so special. The go-to choice for many of WTP's pro team, the Patron Fork might just be the last fork you ever buy. - Full liquid post heat-treatment on 4130 M2 Chromoly - Fully CNC’d steerer, single butted - Integrated crown race, designed to work with integrated headsets with a 45° bearing - 7mm, full investment cast, 4130 Chromoly, heat-treated, for 3/8''(10mm) axle - 7075-T6 alloy top bolt, M24 thread
$387.00 - $427.00
ENVE's Road Fork is the fork by which all others are judged, built for road cyclists looking for the optimal balance of weight, strength, and stiffness. When everyone was turning away from the fork aftermarket, we focused our efforts on creating the best aftermarket fork we could. By following our mantra of functional simplicity, we developed a manufacturing process that allows the fibers in an ENVE fork to run continuously from the top of the steerer to the bottom of the drop-outs. The ENVE forks feature a hollow one-piece design free of bonding or drilling, and the brake bolt hole is molded into the crown, allowing for additional weight savings and strength. You can literally put an ENVE fork on a bike within minutes of it leaving the mold. While this manner of construction is novel, the real win is that the majority of artisan frame builders and customers choose ENVE as their fork of choice due to its confident on-road performance and handling characteristics.
Replacement disc compatible forks for the Surly Straggler. - Tire Clearance: 50mm (w/o fender) - Weight: 2.4 lb (1.1kg) uncut - Axle-to-crown: 380mm - Offset: 44mm - Steerer: 360mm, 1-1/8" straight
The ultimate carbon fiber disc brake compatible cyclocross fork. ENVE created this fork because we love cyclocross racing and gravel road adventures. Like all ENVE products, this fork was developed from a desire to improve the ride experience. In this case they knew that a thru-axle would make for a better tracking and braking front end. A quiet ride is also a priority, so the addition of a thru-axle means less rotor rub and caliper adjustments. Because the majority of time isn’t spent racing under UCI rule, they made this fork compatible with high volume tires — you can run up to a 45mm (1.9-inch) tire with a 700c wheel and up to a 50mm (2.0-inch) tire if you are running 650B. Using our proprietary molding methods, the thru axle disc cyclocross fork offers the ultimate in cyclocross and gravel road bike performance. From steerer tube to dropout the forks are constructed in one piece, which equates to a very efficient structure that yields a lightweight and highly durable product. The front thru-axle diameter is optimized for road and cyclocross disc applications at 12mm. Whether you are racing on the World Cup cyclocross circuit or riding gravel events like the Crusher or Dirty Kanza, the ENVE thru-axle cyclocross disc fork is designed to perform in these environments. - 1-1/8 – 1.5-inch tapered steerer
This fork will accept 26-inch tires up to 3.8-inch wide with plenty of clearance, even using rims as wide as 82mm. Surly's 100mm spaced fat forks let you build a front wheel using standard 100mm front hubs with zero offset. This spacing opens up all sorts of options for front hubs including dynamo hubs and other hard to find goodies that generally only come in 100mm spacing. Internally-butted tapered straight legs. 51mm I.S. disc brake caliper mount uses standard front adapter. Chromoly steel. Available in black. - Axle-To-Crown: 447mm - Offset: 43mm - Steerer: 260mm 1-1/8" straight - Tire Clearance: 26 x 3.8" (on rims up to 82mm wide). Getting 4" tires through 100mm spaced dropouts can be a little tricky. Be patient.
Here it is, you asked for it, you got it! We’ve created a segmented mountain bike fork to pair with our Electric Queen. Even better, we’re offering it in painted-to-match colors for those of you who bought a Cyan splatter complete or one of the yellow/pink/black fade Queens. Now you can make your EQ over into the fully rigid bicycle of your dreams. - 4130 butted and tapered fork blades - Clearance for 27.5 x 3.0 or 29 x 2.25 tires - 15x110mm Boost spacing - E.D. coated for durability and rust prevention - 1-1/8" Straight steerer tube - Thru-Axle included - Axle to Crown Length: 485 mm - Brake Mount (Fork): IS Disc Brake 160 - Crown Race: 30 - Material: Steel - Offset: 51 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 350 mm
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Stiff yet plush, Ritchey's WCS Carbon Mountain Fork soaks up the bumps and makes those tough climbs just a bit flatter. It's as light as it is tough thanks to the one-piece carbon crown and steer tube section, not to mention full carbon dropouts. It's suspension-corrected so it fits on most modern mountain bike frames, too. Enjoy the lateral stiffness of the carbon construction when you're grinding up tough singletrack, and let the vibration damping do the work on the way down to keep you comfy all ride long.
Ground breaking riding deserves a fork so burly fork that it can literally break the ground, should the need arise. WeThePeople's Sterling fork is masterfully crafted to meet the insane demands of team rider, Pete Sawyer. The Sterling can handle it all, and it looks good doing it. Find a matching color scheme on the Sterling signature frames too! • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 32mm • Dropout: 6mm laser cut & CNC machined, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
Ritchey's history with cyclocross runs long and deep, sort of like the mud sections of your favorite 'cross course. The WCS Carbon Cross Canty Fork is designed for the rigors of cyclocross and those who demand traditional canti brakes. Decades of experience between the course tape, and building the bikes and components designed to win, inform the performance and design details of this fork. It employs a monocoque construction, and it's compatible with standard and integrated headsets. - Blade: Carbon - Crown: Carbon - Steerer: Carbon - Steerer Length: 300mm - Steerer Diameter: 1-1/8” - Rake: 45mm - Blade Shape: Curved - Drop out: Carbon - Crown Diameter: 45mm - Integrated 45-degree crown race - Axle-to-Crown: 395mm - Finish: Matte UD carbon - Weight: 448g (w/ uncut steerer) - Brake mount: Canti - Compression plug included
Up your game with this all-Carbon rigid fat bike fork. Fitting up to 4.8" tires with a 26" wheel or 3.0" with a 27.5", this weapon will put your fat bike on the diet it deserves. - Full OCLV carbon construction with tapered 1-1/8-1.5" headtube 51mm offset - Accepts post mount brakes, up to 210mm max rotor size - 490mm axle-to-crown length, fits up to 26 x 4.8" or 27.5 X 3.0" tires - Includes 150x15mm thru-axle and carbon compression steerer plug - Carbon armor replaceable dropout guards
Following input from WeThePeople flatland riders Waldemar Fatkin and Dustyn Alt, the Utopia Fork is reborn for 2018 and now features zero degrees of offset to suit technical flatland riders who need a bombproof fork. The smooth tapered legs and extra strong slotted dropout design make this thing the perfect zero offset fork for flatland riders wanting to put their fork through some serious abuse. Available with or without brake mounts depending on what side of the century you started riding. - Full liquid post heat-treatment on 4130 M2 Chromoly - Fully CNC'd steerer, single butted - Integrated crown race designed to work with integrated headsets with a 45° bearing - Laser cut and CNC'd, 5mm, 4130 CrMo, heat-treated for 3/8'' (10mm) axle - 7075-T6 alloy top bolt, M24 thread, 3/8” socket wrench fitment
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
The WeThePeople Message Fork is a super tough, yet elegantly designed fork for park riders looking for a balance between strength and weight. Using a super tapered leg, shorter 28mm offset, and a unique investment cast fork cap, the Message fork comes with a reinforced longer steerer tube allowing you to run a Gyro or your personal choice of spacers to dial in your bike to perfection. - Investment cast fork cap - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing - Full liquid post heat-treatment on 4130 “M2“ CrMo - Fully CNC’d steerer, internally and externally butted
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
Page 1 of 3 Next page