Full carbon fiber road handlebar with thoughtful ergonomics highlighted by a short-reach, shallow-drop geometry and full electronic groupset compatibility. Because we understand that your ride experience can be established by the comfort and control achieved with a handlebar, we take handlebar design seriously. The ENVE Compact Road Handlebar is available in both a traditional and compact geometry and a variety of width options to meet the fitment needs of most cyclists. Ergonomics of the Road Bars are thoughtful and allow for a wide range of adjustability from tilt to brake/shift lever placement. To round off the finish, the ENVE Compact Road Handlebar can be routed externally for mechanical groupsets but is also drilled for internal electronic routing for modern electronic drivetrains, including compatibility with Shimano RS-EW910 bar-end plug junction box installations. The Compact Road Handlebar includes ENVE's Integrated Bar End Plugs. - Material: Carbon Fiber - Di2 Compatible: Yes - Reach: 79mm - Drop/Rise: 127mm - Clamp Diameter: 31.8mm - Torque Spec, Face Plate: 5.5Nm - Torque Spec, Controls: 6Nm-8Nm - Weight: 40cm - 216g; 42cm - 220g; 44cm - 229g
Fizik's Cyrano R1 Handlebar gives every cyclist the same low weight, high stiffness, and incredible ergonomics that the pros use. These carbon handlebars use Fizik's unique Spine Concept fitting technology to offer incredible ergonomics and a perfect fit on your bike. Designed for total compatibility with Fizik's saddles and stems (sold separately), the Cyrano R1 Chameleon handlebar optimizes your position for race day performance.
Trek's lightest MTB handlebar offers an oversized 35mm clamp diameter that adds strength and saves weight. - Oversized 35mm clamp diameter offers increased strength and minimal weight - OCLV Carbon construction is the benchmark for durability and light weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - Trim Lines allow personalized fit
The Pro PLT Ergo bars feature an ergonomic shaped top section for optimal pressure relief and a compact bend for a seamless transition to riding in the drops. They're constructed of AL-2014 DB aluminum for a lightweight, durable performance handlebar.
Superleggera, the lightest 3T drop bar ever also offers classic good looks. The new constant-taper center section creates a more structurally efficient shape (lighter, stiffer) and a remarkably comfortable hand support despite visually fitting within the classic dimensions of a drop bar. The drops use a classic round shape favored by traditionalists and many pro racers. - Constant-taper center section & traditional round drops - Weight: 166g - Material: Unidirectional carbon - ultralight layup - Cable routing: Internal cable channels - Stem torque: 5Nm maximum - Shift/brake lever torque: 8Nm maximum - Clip-ons: Not compatible - Di2 compatibility: Fully compatible, including with Di2 bar plug Junction A
The Mad Max handlebar has been a part of WTP's line since 2008 to cater to Max Gaertig’s powerful style with a towering (at the time) 8.7" rise. The Mad Max bars now feature a rise of 9.5", and a width of 30". Paired up with max's proven geometry, the classic just got better.
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the Carbon Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Carbon fiber - Width: 750mm - Backsweep: 7 degrees - Bar Clamp Diameter: 31.8mm - Rise: 20mm - Upsweep: 5 degrees - Colors: Black
With the Descendant series, TRUVATIV focuses in on the characteristics that matter most to true mountain bikers: durability, specificity, affordability, and style. Guided by input from the best riders, the components in the Descendant line have been designed to work on the most aggressive trails. - Stiff, precise, and super-wide - Carbon fiber perfection
$75.99 - $76.99
FSA's Metropolis multi-position handlebar features a stylish wing shape for an ergonomic, flip-flop design at home on your commuter, cruiser, or cafe racer. Set it as a high flyer or low rider to suit your personal and riding styles. - Weight: 300g - Width: 620mm - Backsweep: 46.5° - Lever Compatability: Mountain 22.2mm - Rise: 32mm
$309.99 - $315.99
With the EC70 Aero, you'll stay comfortable while reducing drag. Thanks to the flattened top profile with internal cable routing and MCD shape technology, this handlebar provides more comfort during long days in the saddle while cheating the wind. And with Easton’s proven composite TaperWall technology and Intelligent Flexibility, the EC70 SL is nice and light at just 255 grams (42cm). - Weight of 42cm bar (grams): 255 - Bar Drop (mm): 130 - Drop Bend Style: Compact - Bar Reach (mm): 80 - Material: Carbon - Bar Top Style: Flat
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
We took our lightest, most comfort-advanced bar – the EC90SLX – and used our second-tier carbon fiber for a more affordable package. The EC70 SL features the same top of the line MCD shape technology for easy position transferring; Taperwall to maintain stiffness while reducing weight; and Intelligent Flexibility for added vibration dampening comfort. It also features recesses for cables and comes in four lengths. The EC70 SL is the full race package deal. - Bar weight: 220g (42cm) - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Clamp diameter: 31.8mm - Reach: 80mm - Drop: 125mm - Materials: EC70 carbon
$169.99 - $197.99
- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep
$55.99 - $66.99
Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.
All Mountain / Freeride / Dirt Jump For those who prefer more rise, Chromag didn't just put more bend in an existing bar stock. The FU40 Hi-Rise handlebar features a specific wall profile optimized for the additional length and torque that corresponds to its shape. Premium quality 7000 series alloy for the best strength to weight ratio.
Velo Orange's Milan bar is so named because it's a great bar for converting an old Italian racing frame with a short top tube. Actually, it's great for converting any frame with a short top tube into a city bike. Folks who like a more aggressive position on a city bike will like it, too. The width is about 570mm and reach is 110mm; there is around 25mm (approximately one inch) of rise. The grips sweep back about 35 degrees, and the grip area is about 170mm long. The clamp area is 25.4mm. The material is polished aluminum alloy. Milan bars work with regular MTB (22.2mm) grips, brakes, shifters, 22.2 inverse brake levers, etc., but not bar-ends.
Parlee's carbon handlebar is one of the most comfortable bars you'll find. The handlebar’s top has a rearward sweep and oval profile for a natural hand position and all-day comfort. The 35mm clamping area creates a solid union with the stem and fork. The ergonomic bend has a short 70mm extension and shallow 128mm drop that complements modern shift/brake lever combinations. This makes the ideal perch for the rider’s hands regardless of build kit. The drops have an extended return creating fuller hand positions for greater comfort. There are also trim lines on the bar termination at 5mm increments for a customized fit. Compatible with all modern rim and disc levers. - Weight: 220g - Bar Drop: 128mm - Drop Bend Style: Compact - Bar Reach: 70mm - Material: Carbon - Bar Top Style: Round
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
Upgrade your ride with FSA's Gossamer New Ergo Road Handlebar. Double-butted and shot-peened aluminum construction makes this bar light and durable. Plus, it features an anatomical shape for a great fit and feel, while built-in grooves make for easy cable routing.
TruVativ's Noir T30 Flatbar is made from TruVativ's unidirectional SL high-modulus carbon for ultra light weight and superb strength. Plus, the wide, flat profile of the bar puts you in an aggressive position perfect for short-travel bikes and it's bar-end compatible, too.
Whether its safety, price, or environmental responsibility, alloy has always been a favorite of many mountain bikers for bars. However, it wasn't until SPANK Industries introduced its patented Vibrocore anti-vibration technology that means alloy bars could match the stiffness, comfort and lightweight of carbon bars. The OOZY Trail 760 Vibrocore Bar is trail tuned and weight optimized in every way. Utilizing a special zirconium doped 7-series alloy blend, Dual XGT tapers, and SPANK's proprietary CNC Bending process, SPANK achieved a remarkably trim weight in a wide 760mm length. The Trail Tuned geometry positions the rider's weight slightly more forward to enhance traction on the front wheel. The OOZY Trail 760 Vibrocore Bar is the ultimate in trail handlebar for those seeking performance, comfort and unbeatable value. - Key Technologies: Vibrocore, Dual XGT, CNC Bending - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±245 (5mm) / ±250 (15mm) - Diameter (g): 31.8 - Rise (mm): 5 / 15 - Length (mm): 760 (Adjustable to 730) - Geometry (deg): 4° up x 6 ° back - Finish: Shotpeen anodized, decal logos - Discipline: Trail
A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep
- High modulous carbon fiber construction - UD Weave carbon fiber - Weight: 273g - Upsweep: 5 - Backsweep: 9
An ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions. The PRO Vibe handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The carbon PRO Vibe handlebar series is constructed from high-performance Innegra fiber. The addition of Innegra fibers strengthens the bar’s most vulnerable areas without compromising its weight, so your handlebar is ready to ride the harshest conditions. - UD carbon construction - Integrated brake and shift cable routing (Also for Shimano Di2) - Anatomic and compact design
- Low-profile integrated handlebar-basket - Compatible with 31.8mm or 25.4mm stems - 6061 aluminum - Cargo surface: 230 x 335mm (9 x 13.1-inch) - Handlebar width: 650mm - Max Weight 10kg/22lbs - Comfortable 30-degree sweep
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
Easton’s new AX series now includes our budget friendly EA50 AX flared drop bar. With the same MCD drop technology as our top of the line road bars, flared to 16 degrees for comfort in the drops and control on gnarly terrain or long gravel assaults. It's time to take the road less traveled with EA50 AX. - Finish: Black Ano/Water Transfer Graphics - Bar weight: 325g (42cm) - Clamp diameter: 31.8mm - Width (center-to-center): 40cm, 42cm, 44cm, 46cm - Flare: 16-degrees - Reach: 80mm - Drop: 120mm - Materials: EA50 alloy
Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control